LATENCY on old serial non USB cables

Multiecuscan usage help and guides
Post Reply
Boris
Posts: 49
Joined: 08 May 2010, 17:23
Location: Croatia

LATENCY on old serial non USB cables

Post by Boris »

Does latency problem exists also on old only serial VAG-COM cables or it is a problem ony on newer VAG-COM USB cables?
alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: LATENCY on old serial non USB cables

Post by alfa156sarajevo »

If it is going to be any help for you...
I have one cable which is old at least 2 years and the other one which I bought few months ago...
On all two of them I have latency problem...
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
Boris
Posts: 49
Joined: 08 May 2010, 17:23
Location: Croatia

Re: LATENCY on old serial non USB cables

Post by Boris »

But both of them are USB?
alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: LATENCY on old serial non USB cables

Post by alfa156sarajevo »

Yes! ;)
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
Boris
Posts: 49
Joined: 08 May 2010, 17:23
Location: Croatia

Re: LATENCY on old serial non USB cables

Post by Boris »

Treba mi informacija da li obican serial ima tih problema, dok se jos da nabaviti...
alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: LATENCY on old serial non USB cables

Post by alfa156sarajevo »

Izvini drug, tek sam sada skontao da tebi treba info za KKL sa serial portom... :roll:
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
Boris
Posts: 49
Joined: 08 May 2010, 17:23
Location: Croatia

Re: LATENCY on old serial non USB cables

Post by Boris »

Nema problema :)
Ma poludio sam sa starim Motronikom od 164 2.0 V6 TB od Stanka sa foruma, stalno me odspajao, pa sam mislio da možda stari KKL sa serialom nema latency problem.. na kraju sam se ipak uspio spojiti na duze vrijeme.
alfa156sarajevo
Posts: 870
Joined: 12 Feb 2010, 09:03
Location: EU, Germany

Re: LATENCY on old serial non USB cables

Post by alfa156sarajevo »

Super! Drago mi je da si na kraju uspijeo i da je sve OK!
I ja imam isti problem na nekim modelima... ili sa nekim ECUima...
npr. kada spajam sa instr. tablom - navigator/ siemens na 166icama uvijek me izbaci nakon 20 sekundi...
nikad nisam imao vremena da istestiram taj latency problem... znam da se nesto moze srediti u postavkama, ali nisam pokusavao...
Coded Keys & CODE card for Alfa Romeo, Fiat and Lancia cars
Post Reply