Proxi alignment fail after headunit replacement
Posted: 22 Mar 2024, 20:49
Hi,
I replaced the headunit and Blue and me module of my 2011 Mito 1.3JTD and after reconnecting the battery I was able to perform a successful proxi alignment. Next I installed an Android headunit that came with a CANBUS box RP5-FT-001. When i reconnect the battery the odometer flashes and during the proxi alignment and entertainment module is discovered but the proxi alignment fails because of a write time out to the entertainment module. Any advice would be appreciated.
ERB
I replaced the headunit and Blue and me module of my 2011 Mito 1.3JTD and after reconnecting the battery I was able to perform a successful proxi alignment. Next I installed an Android headunit that came with a CANBUS box RP5-FT-001. When i reconnect the battery the odometer flashes and during the proxi alignment and entertainment module is discovered but the proxi alignment fails because of a write time out to the entertainment module. Any advice would be appreciated.
ERB