Page 1 of 1
MES 4.7 - Quadrifoglio Splitter
Posted: 23 Nov 2020, 12:52
by bowdenandymecom
I've started using 4.7 on my early 2017 Giulia Quadrifoglio.
Although Scan recognises both left and right Active Aerodynamic Modules, I can't get MES to connect to either of them. I tried several times.
Andy
Re: MES 4.7 - Quadrifoglio Splitter
Posted: 13 Dec 2020, 21:21
by DANIELE
try this .... if you use elm327 when it asks you to insert adapter 5 do not insert it and go on
Re: MES 4.7 - Quadrifoglio Splitter
Posted: 18 Dec 2020, 21:52
by bunrotha
I'm seeing the same problem on my 2019 Giulia QF. No connection with or without adapter 5. I'm also not seeing a lot of other modules, only a very few show up with the adapter, and a few others without.
I wonder if adapter 6 is actually what's needed on this model?
Has anyone else tried?
Re: MES 4.7 - Quadrifoglio Splitter
Posted: 19 Dec 2020, 11:24
by bowdenandymecom
I use MES Multiplex. I understand that a problem is recognised in 4.7 and there will be an update soon.
Re: MES 4.7 - Quadrifoglio Splitter
Posted: 21 Dec 2020, 20:16
by bunrotha
In which case, hurrah for updates.
Happy to contribute reports or testing if needed to help with any patches.
Re: MES 4.7 - Quadrifoglio Splitter
Posted: 13 Jan 2021, 13:51
by bowdenandymecom
I see 4.7R1 is now released.
Re: MES 4.7 - Quadrifoglio Splitter
Posted: 13 Jan 2021, 13:56
by bunrotha
Downloading now.
This evening, my laptop, along with adapter 5, will go and have a little chat with those splitter modules, see if they're feeling more talkative now.
Re: MES 4.7 - Quadrifoglio Splitter
Posted: 13 Jan 2021, 14:07
by shpuncik
bunrotha wrote: ↑13 Jan 2021, 13:56
Downloading now.
This evening, my laptop, along with adapter 5, will go and have a little chat with those splitter modules, see if they're feeling more talkative now.
splitter needs adapter 6/grey