cantiecar with windows 10
Posted: 22 Nov 2018, 23:15
Hi all,
I have got a new pc with windows 10 and i have cantiecar v4 interface
it works perfectly with windows 7 but with windows 10 i can't connect to some modules
after investigation i found when i test the cable on windows 7 i have no errors but in windows 10 i get a lot of errors like below
what could be the problem?
I have got a new pc with windows 10 and i have cantiecar v4 interface
it works perfectly with windows 7 but with windows 10 i can't connect to some modules
after investigation i found when i test the cable on windows 7 i have no errors but in windows 10 i get a lot of errors like below
Code: Select all
CR:Copyright (C) 2005-2018 tieCAR.net Company ::.
ID:CANtieCAR:tieCAR.net Company ::.
SN:WTCWMJ21
BW:4.1.846
HW:4.3
FW:4.1.428
PT:2.6.1204
PW:ON
UP:02
UB:0.390V
PI:ON
UI:4.786V
U8:0.000V
PA:5V
UA:4.786V
Selected Mode: FES - MultiECUScan (FiatECUScan v3.4+)
--------------------------------
MCU:AT91SAM7X512
Test MCU pins:..
82(A01) - Shorted to 21(A13)
82(A01) - Shorted to 24(A16)
82(A01) - Shorted to 26(A18)
....
89(A05) - Shorted to 24(A16)
89(A05) - Shorted to 26(A18)
.........
22(A14) - Shorted to 24(A16)
22(A14) - Shorted to 26(A18)
....
26(A18) - Shorted to 21(A13)
...
49(A21) - Shorted to 24(A16)
49(A21) - Shorted to 26(A18)
...
56(A24) - Shorted to 24(A16)
56(A24) - Shorted to 26(A18)
.......
40(B00) - Shorted to 21(A13)
40(B00) - Shorted to 26(A18)
....
54(B04) - Shorted to 24(A16)
54(B04) - Shorted to 26(A18)
.
34(B05) - Shorted to 21(A13)
34(B05) - Shorted to 24(A16)
34(B05) - Shorted to 26(A18)
..
38(B07) - Shorted to 24(A16)
38(B07) - Shorted to 26(A18)
..
27(B09) - Shorted to 24(A16)
27(B09) - Shorted to 26(A18)
.....
29(B14) - Shorted to 24(A16)
29(B14) - Shorted to 26(A18)
.........
69(B23) - Shorted to 24(A16)
69(B23) - Shorted to 26(A18)
.....
10(B28) - Shorted to 26(A18)
.. = ERRORs: 28
--------------------------------
Rates:
K : 1417 kbit/s
L : 1417 kbit/s
K8 : 1413 kbit/s
K-High : 1417 kbit/s
K-Low : 1413 kbit/s
CAN : 716 kbit/s
FT_CAN : 1093 kbit/s
H-High : 1099 kbit/s
H-Low : 1413 kbit/s
SW_CAN : 1091 kbit/s
--------------------------------
Bluetooth: ..............................hc01.comV2.0 = Present
--------------------------------
WiFi: ..................ESP8266EX 512KB 2C:3A:E8:1D:1C:BB = Present
--------------------------------
ADC and POWER Switches:
U_01 : 0.000V - TEST: 4.786V
U_08 : 0.000V - TEST: 4.750V
U_09 : 0.000V - TEST: 4.750V
U_16 : 0.248V
--------------------------------
SW_ISO SW_ADJ : U_ISO U_ADJ U_LOW U_HIGH
OFF OFF : 4.786 4.786 4.750 4.750
ON OFF : 4.786 4.786 4.786 4.786
OFF ON : 4.786 4.786 4.750 4.786
ON ON : 4.786 4.786 4.786 4.786
--------------------------------
DC-DC:
Skiped - Apply External Power to device and run test again
--------------------------------
RESULT : Error
what could be the problem?