Page 1 of 2
Motronic M2.10.4 Fiat coupe 20VT
Posted: 03 Apr 2010, 10:56
by _-_pretender_-_
Hi Yani, congrats for the great work in developing this scanner! Just wanted to leave a request for development in the support for the motronic m2.10.4, it would be very useful, most of the owners dont have a good scanner to work with...
Congrats!
Re: Motronic M2.10.4 Fiat coupe 20VT
Posted: 17 Apr 2010, 08:15
by _-_pretender_-_
Re: Motronic M2.10.4 Fiat coupe 20VT
Posted: 24 Apr 2010, 10:58
by rob3rto
+1 on the above. Getting fed up with trying to use Unidiag.
Re: Motronic M2.10.4 Fiat coupe 20VT
Posted: 25 Apr 2010, 16:38
by Zubrania
+1 That will be really nice to have the ecu supported
Re: Motronic M2.10.4 Fiat coupe 20VT
Posted: 25 Apr 2010, 17:50
by oem
+1
Re: Motronic M2.10.4 Fiat coupe 20VT
Posted: 24 May 2010, 13:13
by Suchy_PL_
+1
Re: Motronic M2.10.4 Fiat coupe 20VT
Posted: 23 Jun 2010, 10:54
by Michele80
Suchy_PL_ wrote:+1
That will be really nice to have the ecu supported
Alfadiag is capable of diagnosing M2.10.4, but it is necessary to buy the license(Bachelor's degree) and it is necessary to use two software to diagnose a car Fiat ecuscan + Alfadiag
.
Re: Motronic M2.10.4 Fiat coupe 20VT
Posted: 02 Jul 2010, 07:58
by schelle_pelle
The support of the 2.10.4 would be also very helpful for the owners of a Lancia Kappa 20Vt. So pleeeeease support it
Re: Motronic M2.10.4 Fiat coupe 20VT
Posted: 02 Jul 2010, 19:23
by schelle_pelle
I assume that you already know, but also Alfa 145/146, 155, GTV and Spider (916) are using this Motronic (TS engines), Fiat Brava/Bravo/Marea (2,0 20V) aswell.
Re: Motronic M2.10.4 Fiat coupe 20VT
Posted: 10 Aug 2010, 19:00
by yani
Hi,
M2.10.4 support is coming up in next release thanks to OEM!!!
I will release it by the end of the month.
Yani
