Ctrl+alt+c problem
Posted: 01 Mar 2018, 00:01
Good evening guys, I have a problem with MULTIECUSCAN. If I click CTRL + ALT + C in the "CAN Setup / PROXI Alignment Procedure> Adaptation" window, nothing comes out, I have recorded Multiecuscan.
Last week I contacted "Obdspecialist" from which I bought both the ELM 327 interface and the MULTIECUSCAN software, when I exposed the problem, they replied that the problem was due to the type of Windows.
I've tried both with Windows 7 and Windows Starter, but the CTRL + ALT + C window does not open.
I would like to activate the sport button on my Delta 1.6 mjet launcher.
Can someone help me?
Thanks so much. Peter
Last week I contacted "Obdspecialist" from which I bought both the ELM 327 interface and the MULTIECUSCAN software, when I exposed the problem, they replied that the problem was due to the type of Windows.
I've tried both with Windows 7 and Windows Starter, but the CTRL + ALT + C window does not open.
I would like to activate the sport button on my Delta 1.6 mjet launcher.
Can someone help me?
Thanks so much. Peter