multiecuscan for steering torque sensor
Posted: 19 Jan 2017, 07:32
Hello,
I have a Lancia Ypsilon 2005 1.4 16V, Petrol (unleaded gasoline).
I have an issue with the steering torque sensor.
As far as I can see from the Supported Vehicles page (http://www.multiecuscan.net/SupportedVehiclesList.aspx) I can connect to the "Delphi Electric Steering" with the Green cable which I can get from a distributor.
However, I wanted to know if it is possible to calibrate the new torque sensor that I will get, with just the "multiecuscan" (free or paid version).
Thank you,
Theo
I have a Lancia Ypsilon 2005 1.4 16V, Petrol (unleaded gasoline).
I have an issue with the steering torque sensor.
As far as I can see from the Supported Vehicles page (http://www.multiecuscan.net/SupportedVehiclesList.aspx) I can connect to the "Delphi Electric Steering" with the Green cable which I can get from a distributor.
However, I wanted to know if it is possible to calibrate the new torque sensor that I will get, with just the "multiecuscan" (free or paid version).
Thank you,
Theo