Help!Faulty Connection with Elm327Usb to F.Panda 2006.1.2.8V
Posted: 07 Jul 2016, 10:44
Hi, just joined the forum ,and want to say hello for dear members! Very -very thankfull for all kind of Help, sorry my bed english!
CAR: Fiat Panda 1.2 8V. 2006 , Elm 327 Usb interface, Win 7 Pr.32bit, experimenting with registred und also demo version of multiecuscan, on two diffrent laptoops, Com Port und Baudrate setting to 100% OK, Interface Test OK.., interface-modul choice strikt follow the recommendations in : " supported vehicles/systems of multiecuscan"!!
PROBLEM : Connection only und alone to engine ECU possible!!! Ther is no, und never successfull Connection on C-CAN basic moduls: to Dash, to Climat, to Service, to BodyCM!! Comming ever "ECU CONNECTION FAIL" etc . massages every times!
By the way : this Elm327Usb interface works korrekt with other programs, for example with modiag--scanmaster--forscan !
Im totally confused...,what du I wrong??? Wenn this Elm327 usb wrong,, wher cann I bay the really right one?? interface Without posterier reconstruktion!!!
P.S:Sorry my Elm327 circuit board not the same , as described by Yani...,
What resistor must be removed in this case????? greitfull help wöre...
Thanks answearing und with kind regads
Lezli
CAR: Fiat Panda 1.2 8V. 2006 , Elm 327 Usb interface, Win 7 Pr.32bit, experimenting with registred und also demo version of multiecuscan, on two diffrent laptoops, Com Port und Baudrate setting to 100% OK, Interface Test OK.., interface-modul choice strikt follow the recommendations in : " supported vehicles/systems of multiecuscan"!!
PROBLEM : Connection only und alone to engine ECU possible!!! Ther is no, und never successfull Connection on C-CAN basic moduls: to Dash, to Climat, to Service, to BodyCM!! Comming ever "ECU CONNECTION FAIL" etc . massages every times!
By the way : this Elm327Usb interface works korrekt with other programs, for example with modiag--scanmaster--forscan !
Im totally confused...,what du I wrong??? Wenn this Elm327 usb wrong,, wher cann I bay the really right one?? interface Without posterier reconstruktion!!!
P.S:Sorry my Elm327 circuit board not the same , as described by Yani...,
What resistor must be removed in this case????? greitfull help wöre...
Thanks answearing und with kind regads
Lezli