Multiecuscan

Hi there
I have a punto year 2002 1,2 16v with problem with elektro steering, i conneted my laptop with Multi ecu scan registred version, but it will not work only on engine ECU. Have then read for electric delphi i shall use ELM 327 connection. But which one to buy? anyone can help?

Regards Tommy

Hello

May be that is treated your problem here ???

In the motor control, you can connect ??

Greeting Eddy

Hi Alfaeddy
Thanks for reply
When i started to use MES for 4 year`s ago i bought a cable called KKL 409 USB, with this i can only connect to engine ECU not for steering, and now i have problem with steering so i need to read error codes for this. I have the registred version MES. and after reading instruction it seemes that i need a cable called ELM 327 but which one?
Thanks for help.
Tommy K.

Hello TommyK

Here a functioning BT ELM Interface

http://www.ebay.de/itm/151635712678?_tr ... EBIDX%3AIT

these dealers you can write if you have a USB ELM
would like to have

Greeting Eddy

Hi Alfaeddy
Thanks for help, Before you send me the post with link to a cable , i ordered one here in Denmark
http://mrperfect.dk/obdii-universal/16- ... odukt.html

I hope this will work, what do you think. Otherwise can i ask you for help?

Regards Tommy.

Hello Tommy

But this is a very expensive interface 44 €

I hope that it works.
The dealers are indeed at
(new version 1.5a)

Greeting Eddy

Hi Alfaeddy
It Didn´t work , so i have returned the cable, and ordered the one you adwise me. Hopefully it will work so i can read error for electric steering on my son´s punto.

Regards Tommy

Hello Tommy
Have you ever taken a test interface ??
What is displayed?

And this interface is probably one of the first that have been described here

viewtopic.php?f=5&t=1493

Greeting Eddy

Hi alfaeddy
Did you mean the " test interface function"?
yes, and when run it say´s ok, but it will not connect, only on engine ECU where it make a fault code.
So therefor i ordered the one you send me a link and i hope it will work.
The problem with steering i hope it´s only the relay´s, them i also already have ordered from Germany, can´t
Find them here in Denmark.
Regards Tommy

Hello Tommy

With testing I mean
Select MES / Settings / Interfaces / used Interface / Test


Only then you can see whether the interface used works
only then remove the possibly existing bridge resistance.

Greeting Eddy