Multiecuscan

Hi
can can you help me?

Windows xp
device to 9600 bps, 8 bits, no parity, stop bits 1, flow control none.
KKL vag com: pin 4-5 (shorted) and powered 12V during MES test



thanks

Maurice Italy

I managed to connect to the airbag control unit, although errortime latency
i used vag com cina version " CH340" pin4-5 united
excuse me for English

regards to all

M-Car Italy

Hello

As it is already in the error log
check the power supply to the control unit (fuse)
But it could also be that the controller has an internal error.

This error can only repair an ECU repair service.


The second error can be read as the airbag was broken

Greeting Eddy