Stilo JTD : Inj correction not displayed
Posted: 16 Jan 2015, 18:30
Hi,
I'm the proud owner of a Stilo JTD 115 8V put on road in july 2005 (but build in november 2003).
It's a 5 doors "berline" (not MW), 146.000 km (91.000 miles), it runs great.
For a couple of month, I sometimes have little "hick-ups" that do not last for more than 2 or 3 secondes and that are so little that I can't be sure of what it is. But I thought it could be injector troubles...
I will put some "magic liquid" (Bardahl Nettoyant Injecteur) in my gasoil tank, but before I do so, I wanted to record the "Inj. correction" for each cylinder.
But here is the trouble, multiECUscan does not display any value in the four "Inj. correction n°X" fields. "not any" means not even a "0" or "null", just nothing as shown by this screenshot:
Here are what the "info" screen displays:
I also clicked the "Scan DTC" button and copy/pasted its contents in a txt file :
I also clicked the red "Report button" (and, Yes, I waited to be back home to reach my wifi connection before I click "Y" in the Send dialog form.
So, please help : is it a know bug ? Is there something I could do to have my "Inj. correction" correctly displayed ?
Thanks for your help (and for reading this).
I'm the proud owner of a Stilo JTD 115 8V put on road in july 2005 (but build in november 2003).
It's a 5 doors "berline" (not MW), 146.000 km (91.000 miles), it runs great.
For a couple of month, I sometimes have little "hick-ups" that do not last for more than 2 or 3 secondes and that are so little that I can't be sure of what it is. But I thought it could be injector troubles...
I will put some "magic liquid" (Bardahl Nettoyant Injecteur) in my gasoil tank, but before I do so, I wanted to record the "Inj. correction" for each cylinder.
But here is the trouble, multiECUscan does not display any value in the four "Inj. correction n°X" fields. "not any" means not even a "0" or "null", just nothing as shown by this screenshot:
Here are what the "info" screen displays:
I also clicked the "Scan DTC" button and copy/pasted its contents in a txt file :
Code: Select all
Scanning ...
Engine
Bosch EDC15C7 CF3/EOBD Diesel Injection (1.9, 2.4)
ISO Code: FD 86 2C 83 07
Body
Body Computer Marelli MF
ISO Code: 40 83 8C 80 A4
Errors found:
U1602 - CAN line error
Dashboard
Instrument Panel Visteon
ISO Code: 32 83 9B 83 A8
Errors found:
B100D - Rev counter
B1006 - Engine oil level low w. lamp
Other
Driver's Door G.E. PROCOND
ISO Code: 86 07 86 02 EA
Errors found:
B1031 - Driver's side rearview mirror defrost
Other
Passenger's Door G.E. PROCOND
ISO Code: 89 07 04 02 6B
Errors found:
B1031 - Pass. side rearview mirror defrost
COMPLETED
So, please help : is it a know bug ? Is there something I could do to have my "Inj. correction" correctly displayed ?
Thanks for your help (and for reading this).
