no connection to Airbag of Alfa Romo Spider 2.0 TS 16V '97
Posted: 01 Mar 2010, 14:48
Hello,
i've read a few about the airbag problems on other forums and here too, but havent found much about my Spider.
I have an Alfa Romeo Spider 2.0 16 TS (making year: 1997) with the 3 pin diagnostic plug for every control unit.
I've got a KKL/USB device from EBAY (like the blue one from this page) with an adapter for the 3 pin plug (also the same like the one on this page).
First i set the port to Com 2 (there my KKL device is located) and chose ALFA SPIDER 2.0 TS 16V and tried to connect (after turning on ignition with motor still off).
But the connection failed.
Any Ideas why it failed? If you need more information on this problem please ask, i'll try to answer.
Greetings, Lars
EDIT: latency was set on 1 ms like shown in the How To guide
i've read a few about the airbag problems on other forums and here too, but havent found much about my Spider.
I have an Alfa Romeo Spider 2.0 16 TS (making year: 1997) with the 3 pin diagnostic plug for every control unit.
I've got a KKL/USB device from EBAY (like the blue one from this page) with an adapter for the 3 pin plug (also the same like the one on this page).
First i set the port to Com 2 (there my KKL device is located) and chose ALFA SPIDER 2.0 TS 16V and tried to connect (after turning on ignition with motor still off).
But the connection failed.
Any Ideas why it failed? If you need more information on this problem please ask, i'll try to answer.
Greetings, Lars
EDIT: latency was set on 1 ms like shown in the How To guide