Page 1 of 1
cannot connect to XENON on Alfa166 with OBDKEY
Posted: 15 Feb 2014, 10:14
by Alfa166
Hi,
I can connect to all ECUs on my '02 Alfa166 except Xenon using the ONDKEY BT with the green adapter.
I also tried the purple one like proposed by AlfaOBD, but no success there either.
An I missing something?
Thanks,
Oliver
Re: cannot connect to XENON on Alfa166 with OBDKEY
Posted: 15 Feb 2014, 16:36
by Alfaeddy
Hello Oliver
Attempts to connect to the xenon headlamps times with the green adapter?
Greetings Eddy
Re: cannot connect to XENON on Alfa166 with OBDKEY
Posted: 16 Feb 2014, 14:28
by Alfa166
Hi Eddy,
yes, tried the green adapter - no success... I tried another (old) laptop without bluetooth and a serial VAG interface.. this was able to connect but since multiecuscan is not licensed on that machine I could not read the DTCs.
But my registered version is able to connect to all other ECUs with the green adapter and OBDKEY BT. So whats wrong?
Cheers,
Oliver
Re: cannot connect to XENON on Alfa166 with OBDKEY
Posted: 18 Feb 2014, 14:57
by Alfa166
ok, using an OBDlink adapter via USB I was able to connect to the XENON ECU. Error C1002 - low voltage from sensor. See what I can find..
I wonder why the OBDKEY wasn't able to connect....?