Multiecuscan

Hi Yani.
I've sent the error reports on connection error to alfa156 2.5V6 auto gearbox. Appreciate your suggestions to resolve problem. Thank you.
Zul

You can try the following:
1. Start Multiecuscan
2. Go to Settings>Interfaces and change KWP2000 Timings to "Fast".
3. Try to connect to the gearbox again

Also, you can try to update to Multiecuscan 1.7 and you can also try to update the CANtieCAR interface with latest firmware from http://tiecar.net/support.html