Multiecuscan

Hi Yani,
I've just update to version 1.3 and need to use the "Simulate" button or simulation mode (old ctrl+F10) but it is asking me for the elm......
If i remember correctly it didn't work on 1.2x too...

is it me?

Hello

Also in the simulation must be selected the correct interface.

I give in this mode the OBDkey can read all this in the logs.

Greetings Eddy

You're right.
I forgot the other day i used the k-line/vag-com cable and i was trying to Simulate on a CAN module.
My bad