Multiecuscan

Hello,

I have a computer (MSI U100 (netbook
With an operating system that came with the computer win xp

Problem:

When I plug the cable (EOBD 1260) computer, the computer recognizes the cable and defines it as "Aonbersli Serial Bus controllers", and the software can recognize only the com port the software situation that does not recognize the cable and I can not work.
Previously on the same computer with the same operating system with the same Driurim and the cable, the computer was for the cable and com port defines it and everything was working.
Today I can not set it as a com port.
Com port is set only "BT port."

I'd be happy to get any help in this is very urgent for me

Thank you
vova

Hello Vova

The EOBD1260 finds its own com port, you can not move the Com port.
Once you have the EOBD plugged and "ECU ID" pressing, should the ECU data are displayed in the query.

Otherwise, it let up the BT COM ports

When reading the characteristic field should be provided sufficient voltage on the battery. If the voltage drops below 12 volts is read Canceled.

Greetings Eddy