Multiecuscan

Hi,

I released Multiecuscan 1.3 today with the following changes:

- Added support for Punto 2012
- Support for Delphi MT25E Injection (1.8) (Stilo)
- Support for Delphi MT27E Injection (1.8) (Palio Restyling2, Palio Facelift 07, Idea, Punto Int, Doblo 119)
- Support for Bosch EDC16C9 CF3/EOBD Diesel Injection (1.9) (Idea, Musa)
- Support for Marelli 8F3 CF5/EOBD Diesel Injection (1.3) (Punto Evo, 500, Qubo, Fiorino, Ypsilon 2011)
- Support for Marelli SELESPEED/DDCT CFC8TDF Automatic Gearbox (Giulietta, Mito)
- Support for Driver's Door MARELLI (Thesis)
- Support for Passenger's Door MARELLI (Thesis)
- Support for Front Doors TRW (GT)
- Support for Front Doors G.E. PROCOND (159)
- Support for DTC Details of Delphi MT25E Injection (1.8)
- Support for DTC Details of Delphi MT27E Injection (1.8)
- Support for DTC Details of Bosch EDC16C9 CF3/EOBD Diesel Injection (1.9)
- Support for DTC Details of Driver's Door MARELLI
- Support for DTC Details of Passenger's Door MARELLI
- Support for DTC Details of Front Doors TRW
- Support for DTC Details of Driver's Door TRW
- Support for DTC Details of Body Computer Marelli (Croma, 159)
- Support for DTC Details of CONTINENTAL Airbag (Bravo '07)
- Support for DTC Details of SIEMENS MY06 Airbag
- Support for DTC Details of AUTOLIV MY06 Airbag
- Support for DTC Details of TRW MY03 Airbag

Great Work !

@ francesco
As far as I know all "yellow windows" on right side and on the bottom in MES and FES are in english.
Even error code descriptions are in English. I do not think that is possible to change it that easily...

yani, whether to wait support Fiat Brava\Marea 1.6 16V IAW 1AF?

Dimko wrote:yani, whether to wait support Fiat Brava\Marea 1.6 16V IAW 1AF?

Yes, that would be very nice...

I have recently purchased multiecuscan but I cannot connect to the 2010 Fiat Ducato chassis ZFA 250000 02207657 Motor FIAE3481D and it has selespeed the engine is saying unsupported errors P0130 Lambda Sensor & P2248 Lambda sensor also body computer error B11A3 drivers side window closing relay. Having found the errors there is no ways to clear or Know where to start any help would be appreciated

Hi Yani,

Would be nice if you can add more better support for ELM wifi.
I have clone and it is not connecting at all.
Tried same device with other softwares and it is working without any problems.
I did test the interface in settings menu and all responses are OK but won’t connect.