Page 1 of 1
elm abs
Posted: 10 Nov 2012, 15:44
by lolo85v
Hello I have to command(order) the cable n°1 to go has abs on alfa 159 but I have the message to verify your cable and your port(bearing) serie!
Have you the solution?
Thank you
Re: elm abs
Posted: 10 Nov 2012, 18:26
by lolo85v
On the other hand I notice that on the elm the pine 16 is blank(virgin) the problem comes can be of her(it)?
http://i42.servimg.com/u/f42/15/62/17/97/20121112.jpg
Re: elm abs
Posted: 11 Nov 2012, 16:44
by Alfaeddy
Hello
To come to your ABS you need an adapter since the ELM is not occupied pin first
And the pin 16 is assigned to each interface, as the interface on this pin to get their power so that the work can.
On the white connector on the board is the pin 16 of the first from left
Greetings Eddy
Re: elm abs
Posted: 19 Nov 2012, 07:06
by lolo85v
Hello yes on my adapter the pine 16 is to connect(bind) but on the elm on my image it is to connect(bind) has nothing!
