Multiecuscan

Hi all,

First want to thank Yani for the software!

I have a question, when I choose within "156 '02 JTS Selespeed" and try to connect to the Bosch ABS 5.7 ECU's (Bosch ABS 5.7 / Bosch ABS 5.7 VDC / Bosch ABS 5.7 ASR/TC) I immediately get an errormessage on the infodisplay of the boardcomputer (free translation from dutch: Error in the ABS /ASR / ... system, go to a dealer immediately)

Connecting to the Marelli Selespeed CFC208F is working fine.
Siemens MY 99 Airbag is also working fine

Which ECU can I choose to connect to the Motronic ECU?
Tried Bosch Motronic Me7.3.1 EOBD injection, but got an error about ISO and I think I did not get all the values on my laptop display.

Any help is appriciated

Regards
Hijmen

Posted also a question like this on the forum of the dutch alfaromeo156club.

They told me that even with Examiner the warning on the cars' infodisplay will pop up when connecting to the ABS ECU's, so this is not an error of this application, the ECU or the cable.

I am still wondering why there is no Motronic ECU mentioned in the list for this car.
I got confirmation it is indeed a Bosch Motronic Me7.3.1

@Yani, I hope you will be able to add this one in an upcoming release
If you need any aditional info you can mail me

Regards
Hijmen