Multiecuscan

fiat interface f-super i like to get it to work whit multiecuscan but dont now how

Do you have web link from that interface so we can see how does it look like?

here is the link
http://www.amallonline.com/obd-ii-obd-c ... 15488.html

becking wrote:here is the link
http://www.amallonline.com/obd-ii-obd-c ... 15488.html

This is just another version of clone ELM327 interface which has a different label on the top.
Before you buy it got to the web site: http://www.multiecuscan.net/SupportedVehiclesList.aspx
Find you car and model there. There you can see what kind of interfaces you need for different ECUs in your car.

Just one info for you with ELM327 you can not read airbag and abs ECUs on some cars (for example: 156, 166…)!
Fot that you need VAG COM KKL interface.

the interface is not reconist at all

No , this Interface ist a another Clone from an ELM 327 ( @ alfa156sarajevo)
an don´t read the Protokoll from a KKL to

Greetings Eddy

I bought one too and I found that I cannot connect it to my 156.

wucc wrote:I bought one too and I found that I cannot connect it to my 156.

At least you can connect to engine ECU...

No this one can't even connect to the ECU.
btw, anyone try this kind of VVL cable with swtich?
dose it work?
http://www.ecvv.com/product/3510294.html

Hello WUCC

Yes with this switchable interface, you can read all of your 156 controllers

I think you do not have the correct driver installed

http://www.ftdichip.com/Drivers/VCP.htm

Check again the COM ports and other settings


Greetings Eddy