Page 1 of 1
Bosh MonoMotronic MA1.7.3 and ABS
Posted: 27 Jan 2010, 09:45
by jaboleq
Hello!
Will those ECU's will be included in future version of multiecuscan ?
- Bosh MonoMotronic MA1.7.3 0261203868 (Bravo Brava)
Bosh MonoMotronic MA1.7.3 0261204007 (Bravo Brava)
Bosh MonoMotronic MA1.7.3 0261204405 (Bravo Brava)
Bosh MonoMotronic MA1.7.3 46543668 (Bravo Brava)
Bosh MonoMotronic MA1.7.3 46467005 (Bravo)
Also will be included ECU of ABS system Teves MK20 ?
All are very popular in old Brava/Bravo cars
Thanks for answers.
Re: Bosh MonoMotronic MA1.7.3 and ABS
Posted: 04 Feb 2010, 22:37
by Red-Bull
Yep,
i agree.. i own a Fiat Bravo 1,4SX from 1997 and i got:
http://www4.pic-upload.de/04.02.10/wf9c1wepfknp.jpg
i think it is a Bosch Motronic MA1.7.3" sein. (0261204405) a friendly guy from fiat forum said.
How are the chances that these will be supported?
Re: Bosh MonoMotronic MA1.7.3 and ABS
Posted: 02 Apr 2010, 17:31
by Red-Bull
Hmm any idea if those ECU will be supported in future?
Else i am think to sell my cables
Re: Bosh MonoMotronic MA1.7.3 and ABS
Posted: 16 Sep 2010, 13:13
by olahaye74
Hi,
I own a Lancia Y10 1.1e and, according to
http://mtsaatp.nerim.net/electronique/lancia.htm , it is equiped with a MA1.7 ECU
(Ref written on the ECU:BOSCH 000 7778785 0)
I have the lancia diag connector to obd adaptor, and I have an ELM327 based diag cable.
I've connected all thoses stuff to my ECU and it seems that there is some traffic between the ELM and the ECU (RX/TX on both sides), but nothing more.
Do you think that there is hope for (at least) partial support for this ECU in the future?
If yes, will this equipment be sufficient, or, is the ELM327 unable to handle this old ECU protocol?
My equipment:
http://cgi.ebay.fr/ws/eBayISAPI.dll?Vie ... 0655244713 (The connector: Fiat/Lancia <-> OBD)
http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0686413188 (The OBD-II ELM327 V1.4a cable)
Many thanks for your help.
Re: Bosh MonoMotronic MA1.7.3 and ABS
Posted: 23 Sep 2010, 19:35
by Red-Bull
Any chance for support in next Version ?
Re: Bosh MonoMotronic MA1.7.3 and ABS
Posted: 03 Jan 2011, 00:28
by Red-Bull
Happy New Year..
any news or ideas if we can expect a support for MA1.7.3 this year?
Re: Bosh MonoMotronic MA1.7.3 and ABS
Posted: 06 Jan 2011, 07:21
by yani
Red-Bull wrote:Happy New Year..
any news or ideas if we can expect a support for MA1.7.3 this year?
yes
Re: Bosh MonoMotronic MA1.7.3 and ABS
Posted: 26 Feb 2011, 12:24
by Red-Bull
Thanks a lot! GREAT GREAT WORK!
Re: Bosh MonoMotronic MA1.7.3 and ABS
Posted: 26 Feb 2011, 13:17
by Red-Bull
Oh.. only in the commercial version support
Thats not nice.. oldest cars are from ppl who dont have money for new cards.. and they need commercial version..
