Multiecuscan

hi guys,
a friend borrow me a cable vag908, i want to know if i can connect with that to my fiat bravo 1.9mjet 150cv 2007.

cable says;
Dual-K & CAN <-> usB
vAG/ISO INTERFACE.

Morphos

Nope, if it's a 908 cable then it's an illegal rip-off of the official VCDS interfaces.
It'll only work with VCDS 908 - it won't work as a KKL interface.

to be true i ddint read the entire rules of the forum, if you cannot do it so forget about it.
Can someone link me a place where i can buy a cable to work on my car and that send it to portugal.



Ps. And the for the old jtd105 from 99 with a plug of only 3 pin can we do something? because i have one too.


ty in advance.
morphos

For Alfa 159 you need an ELM 327 v1.3 or higher interface. You can find it on eBay for very cheap price - about 15 USD.
For your old Alfa 156 1.9JTD 77kW you need K-line interface (VagCom KKL USB 409.1 version). You can find it on eBay for very cheap price - about 10 USD.

If you want to spend some more money than you can order an OBD key (v1.4). In OBD key you have ELM and KL interface.
http://www.obdkey.com/index.asp

Before buying anything please see this web page: http://www.multiecuscan.net/SupportedVehiclesList.aspx