Page 1 of 1
service reset on Panda 4x4
Posted: 11 Jan 2012, 14:46
by chris h
I am having a problem resetting the service light on a panda 4x4 1.2 55 reg. The ECU scan will not communicate with service option, also the engine management light is flashing constantly but there are no fault codes stored. The chassis No is ZFA16900000489186 can i go in under a different model or will this not work on this car.
Chris
Re: service reset on Panda 4x4
Posted: 11 Jan 2012, 19:35
by Zwierzak
When you have hot engine try accelerate 3 times do 6500 RPM
Re: service reset on Panda 4x4
Posted: 12 Jan 2012, 11:27
by Juggers2k
Zwierzak wrote:When you have hot engine try accelerate 3 times do 6500 RPM
At the risk of asking a silly question, what does that achieve?
Re: service reset on Panda 4x4
Posted: 12 Jan 2012, 12:43
by Zwierzak
chris h wrote:the engine management light is flashing constantly but there are no fault codes stored
Chris
I suppose that this is problem with phonic wheel adaptation.