Page 1 of 1
will this work with your program?
Posted: 05 Oct 2011, 19:14
by andynutting25
hi looking for a interface to use the program but i don't have a ebay account, but i do have a amazon and found this
http://www.amazon.co.uk/Cable-409-1-Sup ... 462&sr=1-1
and i was just wondering if it will work? many thanks Andrew
Re: will this work with your program?
Posted: 06 Oct 2011, 10:57
by Juggers2k
That should work with modules that are listed as supporting "KL" interfaces on the supported vehicles list:
http://www.multiecuscan.net/SupportedVehiclesList.aspx
Anything that's not listed as KL, or that is listed with A1/A2/A3 after it will need additional cables though.
Have a look at the FES distributors list:
http://www.multiecuscan.net/Distributors.aspx
There are several distributors in the UK who also sell the hardware, and have their own online stores, so they could sell you all the cables you'll need, and you wouldn't need to use Ebay.