Multiecuscan

Hello everyone,
I have this elm 327 1.4a download/file.php?id=238 ,download/file.php?id=239 but when I try to connect to my
FIAT 500 1.3 mjet 75 cv with multiecuscan 282 and do the test I get this error atbi error 94.
What can I do?
I have to throw it away or can I resolve this problem in some mod?
Thanks for all your answers and sorry for my English

Have you tried to click on the test in settings interface? if the error message there is a problem in the elm327.Some china sellers have bad interfaces with elm327 1.2 .

thanks for response.....however I tried the test but the result is always this error ATBI 94....
I read in this forum that some people have solved the problem removing a resistor (R4 or R25/26) from the interface and add another 120 ohm and 560 pf between 6 and 14 pin
Is possible on my type of interface or I have to buy another ???

Hi
If you try to connect to a can ecu or to the body,
maybe you have a foulty interface...

you have to change c14 and c15 capacitors that are wrong value.. change with 2 new one of 560pf value..






If you have problem, ask to me!!

Bye
Matteo Itlay

Is ok ?
puo andar bene o ho fatto una vaccata?

Piranha666 wrote:Is ok ?
puo andar bene o ho fatto una vaccata?

Sembra andar bene..
I condensatori sono nuovi sono giusti?? Li hai provati con un tester che provi la capacità??

It's look like ok.. but le capacity of the 2 capacitor are ok?? Do you have tested??

Have you tried to click on the test in settings interface? if the error message there is a problem in the elm327