Page 1 of 1
Doblo: start / stop system - disable / activate
Posted: 28 Feb 2011, 08:09
by doblo
some Doblo 2010 owners wish to disable the start / stop system with Multiecuscan.
It's possible with the board computer but with after pulling off the ignition key the system is set to "activate" again !
Thanks
Re: Doblo: start / stop system - disable / activate
Posted: 01 Mar 2011, 21:05
by johnboyhgt
Start /Stop is EU law and as such cannot be disabled , FES is based on fiat examiner and dealers cannot disable it either
John
Re: Doblo: start / stop system - disable / activate
Posted: 27 May 2011, 20:00
by EnIgMa
johnboyhgt wrote:Start /Stop is EU law and as such cannot be disabled , FES is based on fiat examiner and dealers cannot disable it either
John
That's the same point for belt buzz, but you can deactivate it where supported.
Yani,
yesterday a friend of mine just asked if it is possible to deactive the start&stop function on his alfaromeo mito. (it should be the same for every multiair engine).
how about that?
Re: Doblo: start / stop system - disable / activate
Posted: 02 Aug 2011, 20:27
by tzok
Sorry for the off-topic, but what is wrong with this system?
It is one of the features I really miss in my Grande Punto.
Re: Doblo: start / stop system - disable / activate
Posted: 04 Aug 2011, 18:48
by EnIgMa
I don't know, I don't have it and seriously i would not have it
I heard a lot of time that it's annoying, and for people like me that have some extras (gauge, audio system, xenon lamp) a drop of electric voltage could damage everything..
