Page 1 of 1
ALFA 156 2.4 JTD connection problem
Posted: 15 Dec 2010, 14:42
by skylight75
Hi all
I have a problem connecting to my ALFA 156 JTD '99
i am using both interface KKL and ELM 327 1.4
with both i can not connect to the ECU
i got the error as you can see in attached image
Re: ALFA 156 2.4 JTD connection problem
Posted: 06 Jan 2011, 17:30
by alpha
I have the same problem
Connects to Airbag and ABS ECU's ok
but no engine ECU
I have notice the latency high warning in the bottom left of FES
All settings have been made as recommended at the website
Re: ALFA 156 2.4 JTD connection problem
Posted: 06 Jan 2011, 18:04
by yani
@skylight75 proably has to select engine "Bosch EDC15 Diesel Injection (2.4)" which is for "ALFA 156 2.4 JTD"....
It is different than "156 '02 2.4 JTD 10V".
Re: ALFA 156 2.4 JTD connection problem
Posted: 06 Jan 2011, 21:34
by alpha
Hi Yani
Any ideas on my problem ?
As i said ok to connect to Airbag and ABS but not the ECU
Happy New Year
Re: ALFA 156 2.4 JTD connection problem
Posted: 10 Jan 2011, 04:30
by YorT
alpha wrote:Hi Yani
Any ideas on my problem ?
As i said ok to connect to Airbag and ABS but not the ECU
Happy New Year
I have the same problem connecting to 147 TS 2.0, After I scan, it lets me get body, CAN and other stuff, but ABS or ECU do not appear in the scan list and as a result gives me an error message that I am unable to connect.
Re: ALFA 156 2.4 JTD connection problem
Posted: 10 Jan 2011, 15:09
by alpha
Select your vehicle
Hit connect
And thats it it should work.
See my post regarding the driver issue.
viewtopic.php?f=5&t=1816