Page 1 of 1
How about ECU re-image (mapping)
Posted: 13 Dec 2010, 19:31
by Argo
I think
Examiner can do this so why shouldn't Multiecuscan
Of course, finding good maps would be another issue.
Re: How about ECU re-image (mapping)
Posted: 13 Dec 2010, 21:53
by wilco1v
Read original ecu map would be fine
share original and remap (good/perfect-tuned file ) would be nice
share now how do it good (once and for all), more than nice
will it give immo problems ???
and how will ..... react if the car won,t run annymore ???
still atractive feature
Re: How about ECU re-image (mapping)
Posted: 16 Dec 2010, 10:59
by tomsa
For remapping you must have a tool to read the ecu eeprom such as EOBD1260 which you can buy in the bay. Then you have to modify the Maps and write back the bin-file to the ECU with the tool I mentioned above. For my car (Alfa 159 EDC16/CF4) it works perfect.
bye
Tom
Re: How about ECU re-image (mapping)
Posted: 19 Dec 2010, 12:55
by wilco1v
yes i have eobd programmer (galletto clone ) reading yes ,programming not done (iaw5nf 1.6 16v stilo)
can you show you,r map org and mod
how did you handle immo??
(anyone out there who now to do programming/boot modus on iaw5nf ?? )
Re: How about ECU re-image (mapping)
Posted: 19 Dec 2010, 17:29
by tomsa
Hi, I do not know iaw5nf. I know only the diesel ECUs EDC16 EDC17. Here you download the file from the ECU, do your remapping and flash back the modified file. The immo code stored in the original file won't be touched. Maybe you should look around at chiptuners.org or so to find out about iaw5nf.
bye