Multiecuscan

Hi,

Just connected to the ECU of my car using version 2.5 of this software. The oil level is full, however when I check it thorough the software the level shows 0%.

Regards,

Eamon.

Don't know for sure but the oil level could be being read as % below FULL. i.e. 0% = full level.

This would not be the first measurement that Fiat have in reverse.

On cars with DPF often the 100% clogged actually means 100% clear. A 95% reading is actually 5% clogged.

Others may be able to clarify/confirm.