Page 1 of 1
USB VAG COM INTERFACE
Posted: 07 Nov 2010, 12:17
by EMILIO13
Hi all !
I have a problem with the USB VAG COM interface ! I want to know if it is possible to use the Multiecuscan programm with the USB port ? I am working under WINDOWS 7.
Many thanks for your help.
Forza Italia
Re: USB VAG COM INTERFACE
Posted: 09 Nov 2010, 15:34
by alfa156sarajevo
Yes it is possible to use Multiecuscan programm with the USB port!
What kind of VAG KKL cable do you have? USB or SERIAL?
Re: USB VAG COM INTERFACE
Posted: 11 Nov 2010, 16:50
by EMILIO13
I have USB cable but the program do not recognize it !!!!!! Have to change something in the parameters ???
Re: USB VAG COM INTERFACE
Posted: 16 Nov 2010, 22:17
by lenivec
have you install correct driver?
Re: USB VAG COM INTERFACE
Posted: 18 Nov 2010, 12:00
by alfa156sarajevo
So did you install all drivers that came with this VAC COM USB cable?
If you did installed all the drivers for VAG COM you just need to modify the com port! Go to Start>Control Panel>System>Hardware>Device Manager>Ports> and than set the settings as shown on web page:
http://www.multiecuscan.net/HowToUse.aspx!!!
After that you need to modify you VAG COM cable so can connect to ABS, AIRBAG or ENGINE ECU.
See this web page:
viewtopic.php?f=5&t=255!!!
Cheers
Re: USB VAG COM INTERFACE
Posted: 22 Nov 2010, 08:47
by peko
hi friends
he must also solder pins ?
anybody can say wihch pin shint with which pin ?
thank you
Re: USB VAG COM INTERFACE
Posted: 24 Nov 2010, 12:20
by alfa156sarajevo
more info you can find here:
viewtopic.php?f=5&t=255!!!