Multiecuscan

Hi Dear Yani;

i 'd like to you that add the Fiat Albea cars support to multiecuscan program. Here is the detailed information about Albea;

The Fiat Albea is the sedan version of the Fiat Palio small family car, built in Turkiye at the Tofaş facilities of the Italian automaker Fiat. It is the replacement for the Siena and has been in production since 2002. It is a low cost sedan, aimed to developing countries markets.

The Albea was designed by the Italian design guru Giorgetto Giugiaro.

In some markets, the car is only sold with one engine. In Romania, Fiat decided that the best strategy in order to compete with the local low-cost model, the Dacia Logan, is to only provide the 1.4-Litre 8-valve petrol engine, rated at 77 bhp (57 kW) at 6000 rpm and 115 N·m (85 lb·ft) at 3000 rpm with 3 versions named Active, Confort and Dynamic, starting from €8.862, with 5 years or 500.000 km (310.685 miles) warranty.



i'm waiting your reply , thanks in advance
mcb58

I think that there is a Palio equivalent foar each Albea model.
So, in order to diagnose an Albea, you just have to select the proper Palio model.

Yani

yani wrote:I think that there is a Palio equivalent foar each Albea model.
So, in order to diagnose an Albea, you just have to select the proper Palio model.

Yani

in fact ,you're right but ; it'll be good to see Albea at program menu in future versions, because everytime we're trying to test some palio , idea,Punto versions in Benzina and also Doblo 1.3jtd for diesel versions in case of diagnose on Albea models .People's dont know which cars compatible at which Albea models..

Thanks