Multiecuscan

Hello, I soldered pins 3,1,7,9. But I can not connect airbag
Immagine.Cosi place you tell me if I done something wrong
Thanks!

It is NOT recommended to connect all the pins together.

Pin 7 to 1 and 9 is OK BUT not to 3 at the same time.

7 to 1 and 9 is OK (ECU & ABS & EPS & Body) is OK

7 to 3 (ECU & airbags) is ok

I did as you say you but it works ...
How should we set the KKL?
Thanks!

Sorry I don't understand what you are actually asking.

How to set comport

Change the lattency from 16 to 2.
That's all.
And try to select the com 1.
It is better.
Good luck