Page 1 of 1

interface ELM327 have ecu PIC18F2585

Posted: 13 Sep 2010, 20:32
by morazem
I have interface ELMM327 which have chip PIC16F2585. Or is possibly to use this interface with program multiecuscan?

Re: interface ELM327 have ecu PIC18F2585

Posted: 14 Sep 2010, 05:40
by yani
There is no way that anyone can tell you if it works or not without testing.
So, just install the interface and test it.

Re: interface ELM327 have ecu PIC18F2585

Posted: 17 Sep 2010, 17:28
by morazem
My ELM327 device which have PIC2585 work fine only when you correct set speed port configuration.
I have ELM 327 : http://global.ebay.com/ELM327_Diagnosti ... 67501/item