Multiecuscan

Hi,
I've bought the OBD II cable http://image.made-in-china.com/4f0j00Ue ... e-Tool.jpg,
the device has installed and I can see it on the "ports" on the device manager com8.
I tried to run the test on the setting form, and get the messege on the subject all the time.
what am I doing worng ?

Hi,
I have bought the same product, from an english ebayer and I have the same problem.
Maybe the ELM that we bought is fake?

I have bought the same elm 327 and have the same problem.
Can you help us...

I don't have this problem anymore. after few times I've understand what I did wrong.
My cable is OK

Hi,
Can you explain what did you do wrong when you have the message "the operation has timed out".
I have the same problem.
Thanks for your help.

The cable should work! You just need to install all the drivers and change (or find/ edit) the com port # and that is it! Maybe you need to restart you laptop and it should work!

I got the same cable, v1.4a, and it is working!

gbbt wrote:Hi,
Can you explain what did you do wrong when you have the message "the operation has timed out".
I have the same problem.
Thanks for your help.

try to connect interface with the car and you should NOT get this message any more!

You're right
Thanks alfa156sarajevo