Page 1 of 1
TRW Electric Power Steering Cable problem
Posted: 13 Dec 2009, 15:22
by chudystilo
TRW Electric Power Steering (needs connection to pin 9 of the OBD connector)
What mean? What modyfing the cable. Pins 1-9 together or 7-9 together?
Re: TRW Electric Power Steering Cable problem
Posted: 13 Dec 2009, 16:43
by yani
You can connect them all together - pins 1-7-9.
This way you can connect to Engine, ABS and Power Steering.
Re: TRW Electric Power Steering Cable problem
Posted: 14 Dec 2009, 21:02
by chudystilo
Thank you. It`s working.
Re: TRW Electric Power Steering Cable problem
Posted: 30 Dec 2009, 23:36
by shifterul
I soldered 1, 7 an 9 and I can connect to ABS but not to the Power steering. I used a tester on the pins and it shows 0 ohms (they are connected)
Re: TRW Electric Power Steering Cable problem
Posted: 12 Jan 2010, 15:24
by Godzzi
Can I soldier 1-3-7-9 all toghether? It is safe?
I want to acces ABS, Airbag, Engine, EPS without to open the OBD connector.
Good Luck
Re: TRW Electric Power Steering Cable problem
Posted: 13 Jan 2010, 07:01
by yani
Hi,
It is safe in most cases, but I would not advise anyone to connect the airbag pin 3 with the other pins - 1-7-9. I have a switch in my cable that switches between 1-7-9 and 3.
Yani
Re: TRW Electric Power Steering Cable problem
Posted: 16 Jan 2010, 09:22
by net_scooter
yani,
please post with pictures, how you made the switch
Thank`s !
Re: TRW Electric Power Steering Cable problem
Posted: 08 Mar 2011, 16:27
by Bravo-JTD
