Page 1 of 1
Reset/Programming functions
Posted: 14 Jun 2010, 05:01
by ARomeo
Programming functions - what is meaning? What can I program?
Alfa 156 JTDm 16V 06.2003
Reset function does not work to board computer
Both odometers are 0.0
If I pay for full version what of described above will be solved?
Re: Reset/Programming functions
Posted: 14 Jun 2010, 09:32
by alfa147jtdm2008
Hi, yes i think it's solved in the next release.
What to expect in next releases:
- Revised EDC16 calibration functions
Bye
Re: Reset/Programming functions
Posted: 14 Jun 2010, 13:46
by ARomeo
alfa147jtdm2008 wrote:Hi, yes i think it's solved in the next release.
What to expect in next releases:
- Revised EDC16 calibration functions
Bye
It is nice but ... you know what is difference between
I think and
Yes, it is ?
And what can I program (which function) on the car computer with this program? Would you be more specific ?
Re: Reset/Programming functions
Posted: 14 Jun 2010, 17:16
by yani
ARomeo wrote:Programming functions - what is meaning? What can I program?
Alfa 156 JTDm 16V 06.2003
Reset/Programming functions means:
- reset of self-adaptation parameters
- calibration functions
- programing (injector codes, enable/disable blinkers, disable seat belt alarm, remote controls)
- service reset
- oil indicator reset (for JTDm)
- forced DPF regeneration
On your engine you can do:
- programing (injector codes, enable/disable blinkers, disable seat belt alarm, remote controls)
- oil indicator reset (for JTDm)
- forced DPF regeneration
You can use the simulation mode to explore all functions in all modules in the free version.
ARomeo wrote:Reset function does not work to board computer
Both odometers are 0.0
I don't understand what you mean. Body computer of your car is not supported and it does not have reset function.
Which odometers show 0 (in which module)?
Yani
Re: Reset/Programming functions
Posted: 14 Jun 2010, 18:49
by ARomeo
yani wrote:ARomeo wrote:Programming functions - what is meaning? What can I program?
Alfa 156 JTDm 16V 06.2003
Reset/Programming functions means:
- reset of self-adaptation parameters
- calibration functions
- programing (injector codes, enable/disable blinkers, disable seat belt alarm, remote controls)
- service reset
- oil indicator reset (for JTDm)
- forced DPF regeneration
My engine is 1.9 JTD 16V M-Jet
On your engine you can do:
- programing (injector codes, enable/disable blinkers, disable seat belt alarm, remote controls)
- oil indicator reset (for JTDm)
- forced DPF regeneration
not interesting for me, sorry
What about for service interval reset of board computer?
You can use the simulation mode to explore all functions in all modules in the free version.
ARomeo wrote:Reset function does not work to board computer
Both odometers are 0.0
Sorry, I was not enouhgt plain
I don't understand what you mean. Body computer of your car is not supported and it does not have reset function.
Which odometers show 0 (in which module)?
The odometers 1 and 2 of engine computer I have mean, not board computer or kolometres-meter.
Yani
Re: Reset/Programming functions
Posted: 15 Jun 2010, 06:38
by TribesMan
You can reset service interval on 156 by holding down + and - buttons on the body computer for 10seconds...
You dont need to connect to examiner to do it.
Re: Reset/Programming functions
Posted: 15 Jun 2010, 13:38
by ARomeo
TribesMan wrote:You can reset service interval on 156 by holding down + and - buttons on the body computer for 10seconds...
You dont need to connect to examiner to do it.
You think I don't know this. It doesn't work on my car!!!
Re: Reset/Programming functions
Posted: 07 Feb 2011, 20:48
by johnboyhgt
In a few cases the reset of service indicator can go faulty.
If you have tried disconnecting the battery and the reset still wont work then you have a faulty speedometer cluster
and the only way to fix is to replace the cluster.
John
Re: Reset/Programming functions
Posted: 09 Feb 2011, 21:52
by ARomeo
johnboyhgt wrote:In a few cases the reset of service indicator can go faulty.
If you have tried disconnecting the battery and the reset still wont work then you have a faulty speedometer cluster
and the only way to fix is to replace the cluster.
John
Sorry, but what is this - speedometer cluster?