Page 69 of 255
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Posted: 14 Apr 2013, 10:57
by lolo85v
Photo of brooches
On this version there is that 3 sons(threads)?
http://i69.servimg.com/u/f69/13/77/86/13/20130412.jpg
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Posted: 14 Apr 2013, 14:36
by Alfaeddy
Hi Lolo58v
I dont understand what you show me with this picture
What ist Brooches ???
And Sorry its an Resistor not Resistance
Greetings Eddy
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Posted: 14 Apr 2013, 14:41
by Alfaeddy
Boris wrote:Alfaeddy wrote:Hello Boris
This ist a nice picture
I was playing with macro settings
Alfaeddy wrote:
yes , remove R6 (121) and your Interface can read CAN Bus with Multiecuscan
Red frame in the last picture
Greetings Eddy
Works OK
Thanks!!!
Hi Boris
Its nice wenn i can Help you
and Marko ist Beautyfull
And a nice work with your Interface
Greetings Eddy
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Posted: 14 Apr 2013, 19:55
by lolo85v
They are the sons(threads) of the grip(taking) odb
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Posted: 15 Apr 2013, 06:17
by Alfaeddy
Hello Lolo85v
What's on your picture I know
only for what you want to show me this picture
I do not understand?
Greetings Eddy
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Posted: 15 Apr 2013, 08:03
by lolo85v
This image is the grip(taking) odb it is normal that he(it) is there that 3 sons(threads) can be the problem comes of her(it)?
http://i69.servimg.com/u/f69/13/77/86/13/20130413.jpg
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Posted: 15 Apr 2013, 08:28
by Alfaeddy
Hi Lolo85v
Now I understand what you mean
CAN signals go through pin 6 + 14 on the OBD connector
CAN CAN high + low
On your picture I can not see the pins are assigned 6 + 14?
I do not think so? or?
Then it is as I have written previously been
your interface can not read CAN bus
Greetings Eddy
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Posted: 15 Apr 2013, 08:50
by lolo85v
He(It) is to bancher that on pine 16-7 et 5
http://i69.servimg.com/u/f69/13/77/86/13/20130414.jpg
Thus I can put them has the trash can?
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Posted: 15 Apr 2013, 09:02
by Alfaeddy
Hi Lolo85v
Yes
take part in the garbage
Greetings Eddy
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Posted: 15 Apr 2013, 11:37
by lolo85v
OK I have another elm and case plastic explosive but not of conection moteur also
http://i69.servimg.com/u/f69/13/77/86/13/20130415.jpg
COMMAND: ATZ
RESPONSE:
ELM327 v1.5
>
COMMAND: ATI
RESPONSE: ATI
ELM327 v1.5
>
COMMAND: ATE0
RESPONSE: ATE0
OK
>
COMMAND: ATL0
RESPONSE: OK
>
COMMAND: ATH0
RESPONSE: OK
>
COMMAND: ATSPC
RESPONSE: OK
>
COMMAND: ATS0
RESPONSE: OK
>
COMMAND: ATCAF0
RESPONSE: OK
>
COMMAND: ATCFC0
RESPONSE: OK
>
COMMAND: ATCRA 7B0
RESPONSE: OK
>
COMMAND: ATSH 7B0
RESPONSE: OK
>
COMMAND: ATAT1
RESPONSE: OK
>
COMMAND: ATST41
RESPONSE: OK
>
COMMAND: ATBI
RESPONSE: OK
>
This interface is compatible with ELM 327 1.4! Should connect properly with all CAN modules.
