Page 4 of 5
Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!
Posted: 22 Mar 2010, 12:01
by Jerry 159
I`m hoping for:
- Fixed DPF regeneration function for 159 2.4 JTDm
- Service interval reset for Alfa 159
Yani can you tell me above functions will be in version 2.0?
Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!
Posted: 22 Mar 2010, 21:22
by Hobbyist
Great work, yani.
I have a question. Will there be a support for ABS 5.3 (Bosch) in Lancia Kappa 2.4 JTD (2000)?
Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!
Posted: 22 Mar 2010, 22:54
by AstonDBS510
Hi!
I'm new to the forum so sorry if I'm posting in the wrong topic. I want to know will this new version have support for
Fiat Bravo 1.9 8v Multijet and if not are you planning to develop it ?
I believe it has
Bosch-EDC 16C39, please correct me if I'm wrong
Thank you in advance
Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!
Posted: 23 Mar 2010, 13:29
by Hobbyist
BTW, I hope there will be polish version.
Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!
Posted: 23 Mar 2010, 23:01
by EnIgMa
Nice work Yani.
I hope new version will support service reset too
because i'm going to use it for steering wheels error reset on a punto mk2 and service reset on new fiat panda.
i have a question for elm327 support.
I didn't understand if software will do everything just with an elm interface? or i need to modify some pins as actual vag-com cable?
because i already have a elm327 1.3a device but it's a bluetooth one, so eventually i can't open it for modding.
thank you.
bye bye
Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!
Posted: 25 Mar 2010, 16:55
by fricy86
Y just wanted to congratulate you on your work Yani.Your helping a lot of us out here.
If you want Y could help you with translating from english to romanian or hungarian.
By the way may Y ask how work goes with the 2.0 version of this very good softwear?!
Congrates. and just keep up the good work...
Frici from Transylvania (Romania)
Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!
Posted: 26 Mar 2010, 07:23
by dany25360
You are the best !Great work
Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!
Posted: 29 Mar 2010, 10:14
by Rain573
Does it support Bosch Motronic M2,7?
Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!
Posted: 31 Mar 2010, 10:17
by pla99
Now March is gone, how far are you???, support for Fiat Grande Punto 1.3 diesel 75hk multijet (2007)?
I just tried the cable anyway and now airbag failure
So now i have 3 errors ABS, AIRBAG and ENGINE lamps on.... fffff
Please give us an update..... then i would be very
Best regards
Peder
Re: Multiecuscan 2.0 - WORK IN PROGRESS!!!
Posted: 31 Mar 2010, 11:14
by yani
Please be patient! I'm working very hard to release v2.0.
As far as I know Fiat Grande Punto (2007) is CAN-only. You cannot do anything with VagCom cable. You'll need ELM 327.
However, it will not be supported in v2.0. I'll add support for Grande Punto soon.
Yani