Multiecuscan

ketx wrote:Hi friend
I have a problem with my ELM327, i try to connect it to my Fiat Ducato but appear one error when I connect, "ELM327->ECU Connection Failed!". The ELM pass all the connection test.

Can you help me to now what is the resistor that i need to remove?

This is my ELM327 adapter

Can sombedy help what resistor i need to remove?

thank you

Hi there,

Can anyone please tell me where is the resistance to terminate.?

Hi crowd,
I have Vgate icar Wi-Fi module running normaly with all IOS/Android apps.
When i use it with my MES v4.2 it connects to all CAN devices.
Here comes the weird part - it cannot connect to Engine ECU and Transmission ECU. The car is Lancia Delta 2010 1.8 TBI oro sportronic.
Either connection with the powertrain modules is a higher speed CAN and the termination capacitors are too big (?) or there is a protocol missmatch.
Any ideas?

Cheers,
Stoyan

Kwaso wrote:

ketx wrote:Hi friend
I have a problem with my ELM327, i try to connect it to my Fiat Ducato but appear one error when I connect, "ELM327->ECU Connection Failed!". The ELM pass all the connection test.

Can you help me to now what is the resistor that i need to remove?

This is my ELM327 adapter

Can sombedy help what resistor i need to remove?

thank you

Did you get it working somehow? I have the same device. It passes every test saying it's compatible with ELM 1.4, but does not communicate with a car.

This is mine,
Any clue?

Easiest way to get it working is getting a new cable. Cheap clones don't work, you have to buy something as "Fiat modified cable" or "multiecuscan modified cable". They cost about $25, but they will work. I have bought three Chinese USB cables for $8 each plus one BT for $5 and they just will not work with my car. It cost me THE SAME as working cable + many months of waiting. It's not worth it.

adamistr0 wrote:

Kwaso wrote:

ketx wrote:Hi friend
I have a problem with my ELM327, i try to connect it to my Fiat Ducato but appear one error when I connect, "ELM327->ECU Connection Failed!". The ELM pass all the connection test.

Can you help me to now what is the resistor that i need to remove?

This is my ELM327 adapter

Can sombedy help what resistor i need to remove?

thank you

Did you get it working somehow? I have the same device. It passes every test saying it's compatible with ELM 1.4, but does not communicate with a car.

Just forget. I bought a cable with same board. And just not work on my Fiat Stilo 1.8 8v. This interface is fake. Thankfully i got back to salesman.

Ciao a tutti sono nuovo del forum.
Volevo chiedervi se l'interfaccia che ho acquistato è modificabile e se la resistenza da eliminare è quella in foto

Non riesco a caricare le immagini

PatrickH wrote: ↑07 Dec 2017, 02:22 index.jpg
Fiat Punto mk2
First registrated in 2000
1.2 8v ISO9141-2

Tryed Torque, AlfaOBD on Android and Car Scanner on Windowsphone. Car Scanner trows out a Warning "Bad ELM Clone" , Torque sticks in a loop trying to find "Model".


Someones got this one running?

I've got the same interface but I haven't found anything about this board. Someone can help us, please?