Multiecuscan

Ok, the problem with Stilo NCL PROXI alignment will be fixed soon in Multiecuscan 3.4.2.
@gioz already tested it on his car with his ELM interface and it works fine now.

Great, it works already, KM not blink. Thank you. They diagnose the glass roof, he got stuck and can not open a combo box is stuck in the very back?

despite updating 3.42 continuous not to work alignment proxy ncl reached the automatic climate it fails and it doesn't complete. does the whole rest work you have some idea?

nicolt wrote:despite updating 3.42 continuous not to work alignment proxy ncl reached the automatic climate it fails and it doesn't complete. does the whole rest work you have some idea?

Go to serial port driver settings and set "latency" to minimum. Or try with different drivers.
I saw some reports from failed Stilo NCL PROXI Alignment where the latency was >20ms (and that's too high for Stilo NCL).

The problem was the latency. all now works perfectly.

thanks Yani

But to stilo 1.8 16v 2002 the problem persist. I change the latency to 1 But the same error.