Multiecuscan

camil wrote:

yani wrote:

maunu wrote:I did send log from my car that has foldin mirrors. It's posted in Alfa 147 window auto closure discussion.
My car is 159 my06 sw with remote closing windows and floding mirrors. Also it has rain sensor that I would like to disable.

So, your car has folding mirrors? I didn't know that.

IMHO, he doesn't. I haven't seen any Alfa 159 with automatically folding mirrors... unless he's got something custom modified:)

Yani, I would like to ask, how similar are the body computers from Brera, Spider and Alfa 159. I'm asking, because I have situation like that: for now I've got a Spider Nuova (2007) 2,4 JTDm. It is not supported by FES, but I did Proxy Alignment from Brera 2,4 JTDm, and what I've observed is:
- I've got automatically folding mirrors which is very good:)
- I've lost on-screen indicator when I'm opening or closing a sunroof which is bad:(
additionally, earlier I've added an on-screen parking indicator and I've made a proxi alignment from 159 and it does work (which is either very good:)).

One more thing which I cannot run is closing windows from a key. I've got anti-trap sensors, and it seems they are working, becasue I have correct voltage on it (look for the screens below):

drivers_door.jpg

passengers_door.jpg

So I don't really know why it still doesn't work. Any ideas?

And about auto folding mirrors, I think only way to make it work is copy this function from Brera/Spider computer to 159 computrer. If it's possible ofcourse.

yani wrote:Can you post the ISO codes of driver/passenger door control modules and boot control module of an Alfa which does not have windows-up function from the remote control?

maunu wrote:

yani wrote:I need logs from Alfa 159 that has folding mirrors. Noone has posted a log from 159 with folding mirrors yet.
About the automatic windows - I think you need hardware modifications to enable this functionality. As far as I remember 159 it uses anti-trap sensors on each door. So, you need to install the sensors or resistors to simulate those sensors first.
I don't remember for sure but I think that there were a few people from the other threads who did this.

I did send log from my car that has foldin mirrors. It's posted in Alfa 147 window auto closure discussion.
My car is 159 my06 sw with remote closing windows and floding mirrors. Also it has rain sensor that I would like to disable.

marqo wrote: Here are my logs from driver door. I haven't the automatic closure, but I've replaced the original windows gasket which was without the anti-trap sensor to the old one with anti-trap sensor.

ECU ISO Code: 86 07 8C 04 F2
2012-03-10 18:13:10
CONNECTED TO:
ALFA 159 1.9 MJET 16V
Driver's Door (G.E. PROCOND)
--------------------------------------------------------------

ECU ISO code: 86 07 8C 04 F2
FIAT drawing number: 50510086
Hardware number: 60-010000
Hardware version: 0A
Software number: NPG 939
Software version: 0505
Homologation number:
ECU programming date: 07/20/2007

READING PARAMETERS:
Anti-trap sensor: V

yani wrote: Please send me (or post here) the 3 lines after "CAN CONFIGURATION DATA:" from a PROXI log from your car. I need to compare this with my car.