Multiecuscan

aletremo wrote: ↑23 Jul 2024, 14:39 hi, after change my uconnect from 5 to 7, my beats audio system rear speaker and subwoofer stop working.

Now i dont know if it can be a problem whit the proxy alignment or somenthing else.

Could anyone hel me?

Blackheart wrote: ↑16 Sep 2024, 00:33 Heya all.

13 Sport with a 15 TFT. Set byte 65 to my sport display, worked great! Can I change any of the 85 bytes below on my car for the gas % in sport mode to work? Throttle input displays fine on my idatalink maestro on my radio via the OBD, I assume there’s a byte setting to get it working on the display in sport?

31 33 31 35 34 34 36 35 38 30 30 31 32 33 34 35 36 37 38 39 30 20 12
09 24 6F 84 00 04 03 00 00 00 29 00 00 00 03 00 00 00 81 D2 4D 06 F4
40 0171 AA 15 00 67 00 09 00 94 03 00 02 00 01 A0 10 20 00 00 00 00
00 00 00 00 27 00 00 00 00 31 06 81 01 00 00 40

31 33 31 35 34 34 36 35 38 30 30 31 32 33 34 35 36 37 38 39 30 20 12 09 24 6F 84 00 04 03 00 00 00 29 00 00 00 03 00 00 00 81 D2 4D 06 F4 40 0171 AA 15 00 67 00 09 00 94 03 12 02 1E 01 00 10 20 00 00 00 00 00 00 00 00 27 00 00 00 00 31 06 81 01 00 00 6C

31 33 31 35 34 34 36 35 38 30 30 31 32 33 34 35 36 37 38 39 30 20 12 09 24 6F 84 00 04 03 00 00 00 29 00 00 00 03 00 00 00 81 D2 4D 06 F4 40 0171 AA 15 00 67 00 09 00 94 06 21 01 00 42 00 00 22 79 41 0A 0C 0D 02 80 20 13 00 00 00 00 31 05 81 00 10 00 04

budgoz wrote: ↑31 Aug 2024, 13:31
Post your proxy and Ill see what I can do.

Panya wrote: ↑09 Oct 2024, 18:24

budgoz wrote: ↑31 Aug 2024, 13:31
Post your proxy and Ill see what I can do.

budgoz please help me too.
FIAT 500 0.9 2018
I installed the TFT speedometer, did the proxy alignment, everything went well.
Trying to change the ECO button to SPORT. It gives this error:
PROXI ALIGNMENT PROCEDURE
Writing CAN configuration data ...
Writing to module Body Computer Node (BCM/NBC) FAILED! - Request out of range error
[102A] errors: Byte 83: 08->00
Writing to module Dashboard Node (IPC/NQS) SUCCESS!
Writing to module Airbag Node (NAB/ORC) SUCCESS!
Writing to module Entertainment Telematic Node (ETM) SUCCESS!
FAILED TO EXECUTE
Writing to module Body Computer Node (BCM/NBC) FAILED! - Request out of range error

budgoz wrote: ↑09 Oct 2024, 20:46
You need to post your proxy code. To access your proxy, from the prox alignment screen, press ctrl + alt + c.

In the message you receive it suggests to change the value of byte n. 83 from 08 to 00, I would start with that. Then try the proxy alignment again.

budgoz wrote: ↑10 Oct 2024, 08:06 Try to load this one with sport mode + sport graphics and let me know.

n.1

Code: Select all

33 32 31 35 30 30 34 32 39 36 36 4F 55 54 50 55 54 44 4A 49 54 20 18 09 20 4F 80 00 05 14 00 00 00 09 00 00 04 10 00 00 00 03 C2 75 06 F4 00 1C C0 00 00 00 16 00 01 08 94 06 01 01 00 40 00 81 20 75 41 0A 0C 0D 01 80 2E 24 00 00 00 00 31 05 61 03 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 94 00 22 00 04 88 07 00 20 80 00 00 30 00 81 00 0F 00 00 00 00 01 00 40 0C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Do you also want to try the abarth graphics or something else?

Panya wrote: ↑10 Oct 2024, 09:06

budgoz wrote: ↑10 Oct 2024, 08:06 Try to load this one with sport mode + sport graphics and let me know.

n.1

Code: Select all

33 32 31 35 30 30 34 32 39 36 36 4F 55 54 50 55 54 44 4A 49 54 20 18 09 20 4F 80 00 05 14 00 00 00 09 00 00 04 10 00 00 00 03 C2 75 06 F4 00 1C C0 00 00 00 16 00 01 08 94 06 01 01 00 40 00 81 20 75 41 0A 0C 0D 01 80 2E 24 00 00 00 00 31 05 61 03 00 00 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 07 00 94 00 22 00 04 88 07 00 20 80 00 00 30 00 81 00 0F 00 00 00 00 01 00 40 0C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Do you also want to try the abarth graphics or something else?

Thank you.
I'll try your PROXY.
If I want sport mode + Abarth graphics, I have to change byte 65 to 60, right?