Multiecuscan

I understand that you can not do anything but demo verrzija should make a connection and then terminate with a message that works only with licensed versions because it is so and can check, body com service reset ....
How do I know if I buy a licensed version that will work.

Hello team.

It's working don't worry. If it has bugs...then that will be fixed.
You can buy a license becasue it is a very good softwear and too cheap.
Ok you can buy an Examiner if you want to be sure but they will let you know if you can do this procedure after you send them more then 4500 euro.
So what do you think.
Till you'll buy the license you can ask here if it's working that function and one of the mates like me will asnwear to your questions.
Good luck

Great news but,
Proxy Alignment is not available for ny Panda '03 1.2 8V.
Can I use the Proxy Alignment Proceedure form another car such as a Punto '03 1.2 8V?
I don't want to try this in case it does something bad.
Thanks. Regards ~ Chris

croydonchris wrote:Great news but,
Proxy Alignment is not available for ny Panda '03 1.2 8V.
Can I use the Proxy Alignment Proceedure form another car such as a Punto '03 1.2 8V?
I don't want to try this in case it does something bad.
Thanks. Regards ~ Chris

Yes, you can. It is the same on Panda, Punto '99 and Punto '03.

Yani

Thanks Yani, and I am sure I am sure others will thank you too.
Regards ~ Chris

That's the best news today for me at last - support for Grande Punto is available. I'm starting to save money for licensed version (as I need Service Interval Reset function), for me it's a quite a lot of money (it's equal to 45 liters of diesel fuel, and more than 15% of my monthly salary) but I think it's worth of it (total cost of a "small" service inspection /oil + filters/ in authorized FIAT service station is about 115€).

Hi Yani,

I have version 2.6 free .
When I do the test mode, Ctrl + F10 engine control unit Alfa 2.5L viewed 166 and then parameter going to freeze, laptop mine.
With the version 2.5 it is ok, no problem.
Comes PROXI of the alignment.?
i have it only with ecu ME2.1 and ME3.1 ,abs and airbag no problems.BUG??????

I have XP on the Laptop with 2GH.


Frank

as you can read the engine control unit, airbag, body comp.on the punto evo as the program does not allow these functions? thanks

hello friends

anybody can confirm , i just buy obdkey to use it multiecuscan on alfa mito diesel ecu edc16

but i read new update just work just mito benzine and with ELM , can you confirm ? no way for diesel mito with obdkey ?

thank you

hello!

i want to retrofit cruise control on a grande punto 1.3mjet 90hp.
in the supported modules the BCM is not listed.

will it be possible with the proxi alignment procedure to activate the cc on the grande?

if so, i'll immediately buy the registed version...


thanks in advance.

Greez from Austria