Self-Adaption reset on Seicento 1.1 don't work

[dennis147]

Hi,

i had reset my Self-Adaption on IAW59F / HW 604 with FES 3.3. My car is an Fiat Seicento 1.1 MPI Year 2001.
The MIL is flashing now and i can't turn it off!

I had tried this from the manual:

1) warm up the engine
2) increase the engine speed three times to 4500RPM and keep it for 3 seconds each time.

after done this, the MIL is flashing again. Any help out there?

greets Dennis

[alfa156sarajevo]

Do you get any errors later when you connect car with the FES?

For Self-Adaption test you should do next:
1. start car
2. worm up the engine (minimum 75C° - I would recommend 85C°)
3. turn off the car
4. turn ignition on (MAR position)
5. execute procedure
6. start the car
7. increase the engine speed 3 times above 4500rpm (I would recommend 5-6000 rpm) and keep it for 2 seconds each time.
8. after that MIL light is turned off
9. turn of the car