Multiecuscan 3.1 RELEASED!!!

[yani]

Hi,

I just released Multiecuscan 3.1.1 to fix minor license problem with version 3.1

I released Multiecuscan 3.1 today.
The main improvement is that now it can write the Odometer data and service info to dashboard modules.

This is the list of changes:
- Support for Valeo XENON headlights (Alfa 166)
- Added Odometer writing support on all Instrument Cluster modules It is in "Service Interval Reset" and "XXX Instrument Panel" modules. Please note that this is a legal procedure for updating new Instrument Clusters with the real mileage of the car. So, it will only accept higher values than your current odometer reading.
- Added possibility to manually enter service info (Date of last service, days till next service, distance till next service, etc.)
- Fixed Serbian language files
- Added "Injection Correction" parameters to EDC15. I'm pretty sure that this data is NOT available on most of the EDC15 ECUs and the parameters will show no data.

Yani

[ARomeo]

The main improvement is that now it can write the Odometer data and service info to dashboard modules - how for Alfa156 1.9JTD 16V M-Jet?

[EnIgMa]

Nice.

what does exactly "it can write the Odometer data" mean?
That you can change the km value on the dashboard? Like...when you buy a new one and you want to align it with all the other modules?

I thought it is done by proxi alignment.

I give you a little suggestion for next version.
The form where you input the date of last service, you could use probable numbers; for example:
On DD, you could insert only numbers 0; 1; 2; 3 for the first number then 0 --> 9 for the second.
On MM, the first value can only be 0 or 1, and the second from 0 to 9.
On YYYY, 1 or 2 (probably only the number 2) on the first number....

...and so on.

At least it is useful to avoid input mistakes.

what do you think?

[ARomeo]

how is it for Alfa156 1.9JTD 16V M-Jet - where is this function? For example cars with EDC16CF3

[159sportwagon]

Hi yani, I have tried to correct the mileage with Fes . I now have only 10000 km on the speedo too much. 116 000 original and now 126,000th how can I put back.its a fiat punto 188 .Best regards

[yani]

PLEASE BE VERY CAREFUL WITH THE ODOMETER CORRECTION!!!
It can only increase the odometer value!

[159sportwagon]

then I look around for a speedometer with less Miles and correct it in this way. Best regards

[159sportwagon]

It is possible that language in the yellow box to change to German

[HappyHarry1951]

I hv downloaded latest ver 3.1 but displayed error of a file during installation.

Btw, does multiecuscan be able to clear the "Immobilzer" alarm ? My ride is a Stilo MS 2.4L 20V.