Grande Punto 1.3 MJT spia olio motore

[fabinger]

Buon giorno a tutti, ieri ho comprato multiecuscan 2.8.2 e tramite ELM 327 sono riuscito ad entrare in centralina motore per spegnere la spia dell'olio in quanto ho cambioto l'olio.
Quando ho riacceso il quadro peò la spia continuava a lampeggiare.

Come posso fare?

Grazie a tutti.

Good morning everyone, yesterday I bought multiecuscan 2.8.2 by ELM and 327 are able to enter the engine control unit to turn off the lamp oil because I changed the oil.
When I powered on the part ment the light was still flashing.

How can I do?

Thank you all.

[yani]

Did the "Oil Change" procedure completed with SUCCESS or FAILED?

Did you also reset the service interval?

[fabinger]

The oil reset procedure is successful.
I also reset the service interval.
When I turn off and turn on the oil light starts to flash.

[dallas140cv]

Your vehicle has the DPF, so you have to go in parameters of engine ecu and make the "oil change dpf reset" procedure.

[fabinger]

Thanks dallas I do that procedure, the system tells me that the procedure was completed, but when I turn off and turn on the context, the oil light starts to blink again.