CENTRAL LOCKING

Multiecuscan usage help and guides
Post Reply
derekwatt5
Posts: 12
Joined: 18 Feb 2011, 18:20

CENTRAL LOCKING

Post by derekwatt5 »

HI

does anyone know if this software can diagnose faults with the central locking?? on a fiat stilo!

can you access the information on the ecu to set it up or change it???

any help

thanks
yani
Site Admin
Posts: 1173
Joined: 06 Nov 2009, 16:40

Re: CENTRAL LOCKING

Post by yani »

Yes, it can.
There are 4 (four) ECUs dealing with the central locking in Stilo - Body Computer ECU, Driver's Door ECU, Passenger Door ECU, Boot ECU ....
derekwatt5
Posts: 12
Joined: 18 Feb 2011, 18:20

Re: CENTRAL LOCKING

Post by derekwatt5 »

what one will deal with the reception from the key fob?? thanks
yani
Site Admin
Posts: 1173
Joined: 06 Nov 2009, 16:40

Re: CENTRAL LOCKING

Post by yani »

It is the Body Computer.
bope
Posts: 7
Joined: 18 Feb 2011, 20:52

Re: CENTRAL LOCKING

Post by bope »

Hi!
I have ALFA 147 1.6 105HP ...the remote key battery is fully charged(3.2V), the led flashing when I push/hold the button...but I cant lock or unlock the doors remotely...I tried to sync the remote with body computer, but when I have to hold a button more than 3sec after that i get message the battery flat...what should I do?
the log:
EXECUTING ADJUSTMENT...
Remote control programming
SECURITY KEY CODE SUCCESS...
COMPLETED
Failed, Battery flat

REMOTE CONTROL DETECTION FAILED...
COMPLETED
Status: UNKNOWN

REMOTE CONTROL STORAGE FAILED...
derekwatt5
Posts: 12
Joined: 18 Feb 2011, 18:20

Re: CENTRAL LOCKING

Post by derekwatt5 »

hi mate

i have the same problem with my stilo! and many others!

pass??????
bope
Posts: 7
Joined: 18 Feb 2011, 20:52

Re: CENTRAL LOCKING

Post by bope »

so I found something interesting...
I made PROXI Alignment Procedure and in the log I found this message: Writing to module: Driver Door Node (NPG)FAILED!
so maybe this driver door node not working correctly, cause "The NPG receives a request to control boot opening via a remote control message or a negative control signal from a button on the central facia control panel." (this info is from ALFA 147 eLEARN cd)
but I'm not 100% sure about this :)
Post Reply