Selespeed Clutch self calibration

Report any bugs found in Multiecuscan and suggest new functionality to be implemented
spyshagg
Posts: 12
Joined: 14 May 2010, 21:54

Re: Selespeed Clutch self calibration

Post by spyshagg »

yes and mine and other stilos selespeed have 15.7mm instead of 28.5
Entonox
Posts: 25
Joined: 25 Feb 2010, 13:59

Re: Selespeed Clutch self calibration

Post by Entonox »

Yes that is correct, i also read that value out of my selespeed system.
Belli29
Posts: 10
Joined: 24 Dec 2009, 12:38

Re: Selespeed Clutch self calibration

Post by Belli29 »

28.00 mm - 28.50 mm are valid only in 5 gear Alfa Romeo Selespeed models. !!!! (Engine off)

best regards

Belli
maxbg
Posts: 8
Joined: 11 Aug 2012, 13:25

Re: Selespeed Clutch self calibration

Post by maxbg »

Apologies for digging out old post... But what is the difference between doing the "clutch self calibration" and "calculation the degradation index"

Do we have to do both when a new clutch is replaced?

it is better to use a VAG com or ELM327?

Appreciate any response!
maxbg
Posts: 8
Joined: 11 Aug 2012, 13:25

Re: Selespeed Clutch self calibration

Post by maxbg »

I did the clutch self calibration by following the instruction closely

(ensure engine and fluid temperature are correct, accelerate in 2nd till 3000rpm and stop)

but the end result is still "NOT PERFORMED" by reading the gearbox parameter.
maxbg
Posts: 8
Joined: 11 Aug 2012, 13:25

Re: Selespeed Clutch self calibration

Post by maxbg »

Anyone?
Post Reply