Fiat Multipla JTD

[ahhl]

1've purchase Vag-Com cable and run the vag-com software on my multipla, the software able to detect the ECU signal. however vag-com does not support fiat. when i switch to Multiecuscan the sotware not able to detect the connection, the no connection error always appear. can help me to correct this

[alfa156sarajevo]

Did you modified your cable?

[ahhl]

no, i did not modify it. should i do that? and how to do that

[ahhl]

no i did not, must i do that? how to do that?

[EnIgMa]

you don't have to modify anything.

according to last version (2.5):
-start your computer.
-connect your kkl cable on pc and OBD then turn on your dashboard.
-start Multiecuscan and go to settings window of FES.
-Select K-Line/VAGCOM
-Check box labeled "show available ports only", then try to understand which one is the right port.

how to know that? --> http://www.multiecuscan.net/HowToUse.aspx
maybe is shown on Device Manager...
or you could try every port in the list
if something go really wrong (any software crash or whatever) restart windows so you ensure the comunication port is not blocked.

let us know.

[ahhl]

done all that. i am able to connect to my car ecu if i use vag-com software. able to scan etc. but on fiatecusan, it keep displaying no connection. port setting same as vag-com setting. i tested on all available multipa's ecu's made (bosch..etc..)

[alfa156sarajevo]

no hard feelings…

but I would advise you to read first this topic: http://www.multiecuscan.net/HowToUse.aspx
in this topic at the end you are going to see that you neet to modify your VAG KKL interface if you want to read your engine ECU, airbag ECU, ABS ECU, EPS ECU, TRW ECU (electric power steering)...

after this I would advise you to read this topic:
go to "Board index < Usage Q&A < VAG KKL cable connections" i think this topic is on page 3
or go to direct link: viewtopic.php?f=5&t=255
in this topic you are going to find how to modify your VAG KKL interface!

any other questions just ask!
Cheers

[EnIgMa]

which model/year etc, is your multipla?

[ahhl]

alfa156sarajevo

i found the problem what wen wrong....thanks for advice... i forgot to change the latency to minimum. now it works
i also have grande 1.4 8v. do we have grande's support here?. i cant find the def file for grande

EnIgMa

multipla jtd 1.9 2003

[alfa156sarajevo]

...i also have grande 1.4 8v. do we have grande's support here?..

according to this: http://www.multiecuscan.net/Default.aspx (scroll at the end of page)
...in next release will be supported Grande Punto!!!