Injector correction 2.4 JJTD CF3

[fredvr]

Hi,

First of all BIG THANKS to Yani for his work.
Just a little presentation, I'm French, drive a Lancia Lybra 2.4Jtd SW 2001 190 000km on which I have re-programmed the ECU (myself) The car really flies. I have also reprogrammed Fiat Stilo, Punto and 1.9 Lybra. I am an Engineer on a 62m Private yacht.

I have an ELM327 1.3a and the full multiecuscan version but cannot see the injector correction, the ECU is EDC15C7 CF3.
Is it avalable on this ECU, it should? or do Y need a KKL interface?
Thanks for any advice.
Fred

[yani]

HI,

I guess that you are talking about "Injector coding".
Unfortunately, injector coding is not available on the 5-cylinder EDC15C7 engines. The ECU on those engines is pre-programmed with injector code 2.

Yani

[fredvr]

I was talking about the correcting injecting values ie -1.2mm3/i that one can read and see if the injectors are still OK.
But if we can't code them, the correction is inexistant.

Thanks for your answer.

Fred